Plan the space and the front swing
Swipe across the diagram to view all labels.
Choose the space and prepare
- Choose a lawful space with enough length and width, clear of crossings, junctions, accesses and restrictions.
- Pull alongside the reference vehicle with suitable clearance and the starting alignment shown in your lesson. Leave room for your front to swing out.
- Stop, secure the car as needed, select reverse and prepare very slow control. Check all around, including both blind spots, the pavement and behind.
Reverse into the space
- Look mainly in the direction of travel while also checking mirrors and other affected areas. Start only when safe.
- Reverse slowly and steer the rear towards the space. Use your instructor-confirmed reference points to judge when to change the steering.
- As the rear approaches the desired kerb position, steer to bring the front into line, then straighten as the car becomes parallel.
- Use brief left-mirror checks to judge the kerb gap. Keep watching the front swing and passing traffic rather than fixing on one mirror or camera.
- Stop if someone enters the manoeuvring area or the view becomes uncertain. Make fresh checks before continuing.
Finish and correct if needed
- Aim to finish reasonably close and parallel to the kerb, clear of the vehicle ahead and any one behind.
- If angled or too far out, stop and plan a small safe correction. Check again before changing between reverse and forward.
- Avoid touching or mounting the kerb. Secure the car when finished; use fresh POM (Prepare, Observe, Manoeuvre) observations before moving away.
Common mistakes
Reversing too fast
Keep the speed low enough to observe and stop before a small error becomes contact.
Forgetting the front swing
The front can move towards passing traffic while the rear enters the space.
Following references without checking
Confirm the actual gap and surrounding people throughout.
Check your understanding
ALD revision questions, not official DVSA test questions or a prediction of test readiness. Answers stay in this page; no account is needed.
Rules and sources
Highway Code rules 200–203 cover slow reversing and effective all-round observations. Do not reverse farther than necessary. Reference points depend on the car and driving position.
Official guidance and sources
- Highway Code: moving off, junctions, roundabouts and reversing (159–203) (opens in a new tab)
- Highway Code: waiting and parking (238–252) (opens in a new tab)
- Highway Code: signals, braking, speed and lanes (103–158) (opens in a new tab)
Guidance checked . Independent ALD lesson notes; not produced or endorsed by DVSA. Follow current official guidance if information changes.
Contains public sector information licensed under the Open Government Licence v3.0. Explanations and diagrams are ALD’s own.
