Driving in is only half the manoeuvre
Swipe across the diagram to view all labels.
Set up for the bay
- Choose a permitted bay with enough room, checking pedestrians between cars, opening doors and other moving vehicles.
- Check mirrors and signal if it would help. Position with enough room to turn without clipping the near corner or a neighbouring car.
- Use the approach and reference points demonstrated in your lesson car. Aisle width and the direction of turn change the setup.
Drive in and straighten
- Look around before steering across the aisle. Move slowly, steering towards the bay when your front has room to enter.
- Watch both front corners and the side clearances. Keep scanning beyond the bay for people and vehicles.
- Unwind the steering as the car lines up with the markings. Finish straight and central, leaving space from any wall, kerb or object ahead.
- Stop and make a planned correction if needed, with fresh observations before changing direction. Secure the car when parked.
Reverse out safely
- Prepare reverse and check all around, including what neighbouring cars hide. Look mainly in the direction of travel, with repeated checks of other affected areas.
- Reverse slowly as the view opens. Stop for approaching people or traffic and whenever you cannot confirm the next movement is safe.
- Check the front swing as you steer into the aisle; the front corner may approach the car beside you.
- Once clear and correctly positioned, stop, select first gear and refresh observations before driving forward.
Common mistakes
Turning in too early
Leave enough clearance at the near corner; slow down to judge the entry.
Watching only the bay lines
Keep checking people, corners and objects ahead as well as accuracy.
One check before reversing out
The view changes as you emerge, so keep observing and pause when needed.
Rules and sources
Highway Code rules 200–203 apply to reversing out. Mirrors, cameras and sensors support direct observations; they do not replace them.
Official guidance and sources
- Highway Code: moving off, junctions, roundabouts and reversing (159–203) (opens in a new tab)
- Highway Code: waiting and parking (238–252) (opens in a new tab)
- Highway Code: signals, braking, speed and lanes (103–158) (opens in a new tab)
Guidance checked . Independent ALD lesson notes; not produced or endorsed by DVSA. Follow current official guidance if information changes.
Contains public sector information licensed under the Open Government Licence v3.0. Explanations and diagrams are ALD’s own.
