Read bends and the surface
- Use LADA — Look, Assess, Decide, Act — to choose a speed for the changing view. Keep looking and reassess if the situation changes.
- Be able to stop within the distance you can see is clear. On single-track roads, allow for an oncoming vehicle needing stopping room too.
- Slow for crests, blind bends, muddy surfaces, gravel, damaged edges and standing water.
- Reduce speed before a tight bend as needed, choose a suitable gear and look along your lane without cutting the centre.
- Leave room from tractors and large vehicles so you can see ahead. They may turn widely into a field or hide other traffic.
Use passing places
- Notice a suitable passing place before meeting traffic. Use one on your left; if it is on your right, wait opposite for the other vehicle to use it.
- Give way to uphill traffic where possible. Cooperate over who can wait or reverse safely rather than insisting on priority.
- If reversing is necessary, check all around and move slowly to a suitable position, seeking assistance if the view is inadequate.
- Avoid unverified verges: soft ground, ditches and steep edges may be hidden by grass.
Pass vulnerable users carefully
- When overtaking cyclists at up to 30 mph, allow at least 1.5 metres; leave more at higher speeds.
- Pass horses and horse-drawn vehicles below 10 mph with at least two metres. Pass pedestrians walking in the road at low speed with at least two metres.
- Allow more space in poor conditions. Wait if width, traffic or view prevents a safe pass and follow a rider’s request to slow or stop.
- Avoid startling horses with revving or a horn. Ensure the complete pass and return can be made safely.
Common mistakes
Sixty because the sign permits it
The road width, surface and stopping view may require much less.
Squeezing past a slow user
Wait for adequate clearance and a clear view rather than forcing the pass.
Using a grassy edge as extra road
Choose a proper waiting place rather than risking an unknown verge.
Rules and sources
Highway Code rules 154–155 cover country roads and passing places; rule 163 gives passing clearances. A national speed limit does not make a narrow lane safe at that speed.
Official guidance and sources
- Highway Code: moving off, junctions, roundabouts and reversing (159–203) (opens in a new tab)
- Highway Code: signals, braking, speed and lanes (103–158) (opens in a new tab)
- Highway Code: road users requiring extra care (204–225) (opens in a new tab)
Guidance checked . Independent ALD lesson notes; not produced or endorsed by DVSA. Follow current official guidance if information changes.
Contains public sector information licensed under the Open Government Licence v3.0. Explanations and diagrams are ALD’s own.
