Read the whole roundabout decision
Swipe across the diagram to view all labels.
Mirrors, signal and position
- Identify your exit using the direction sign, then follow the lane signs and arrows. Leave space to see markings hidden by traffic.
- Check centre and the relevant side mirror before signalling or changing position.
- First exit left: normally use the left lane and signal left. Exit right or full circle: normally approach on the right and signal right, unless directed otherwise.
- For an intermediate exit, choose the appropriate lane and normally approach without a signal. Read local lane directions rather than assuming every straight-ahead exit uses the same lane.
Speed, look and entry
- Use LADA — Look, Assess, Decide, Act — to judge a safe entry gap. Keep looking and reassess if the situation changes.
- Slow to a speed that allows a clear decision and a stop at the give-way line if needed. Select a suitable gear.
- Look right for approaching and circulating traffic, then keep checking ahead so you do not drive into a vehicle that has stopped.
- Assess speed, position and likely path together. An indicator alone is insufficient; look for motorcycles and vehicles hidden by larger traffic.
- When the gap and entry space are safe, move smoothly and make suitable progress. Avoid following the car ahead without your own check.
Circulate and leave
- Follow the lane markings and keep space from vehicles alongside. Give cyclists and large vehicles room; they may follow a different path from yours.
- Before leaving, check centre and left mirrors and the relevant blind area as needed. Signal left after the preceding exit where the layout permits.
- Check for cyclists continuing around on your left and people crossing or waiting at the exit. Leave only when the path is safe.
- If you miss the exit, use the safe permitted route. Another circuit is suitable only if your lane, signs, markings and traffic allow it; a spiral lane may lead directly off.
Common mistakes
Watching only to the right
Keep checking the immediate path ahead as well as the entry gap.
Cutting across to an exit
Follow your lane safely and accept redirection if the required movement is no longer safe.
Using the clock face as a lane rule
Read the actual signs and arrows before selecting a lane.
Check your understanding
ALD revision questions, not official DVSA test questions or a prediction of test readiness. Answers stay in this page; no account is needed.
Rules and sources
Highway Code rules 184–190 apply. Give way to traffic approaching from the right unless signs, markings or signals direct otherwise. Actual lane information takes precedence over simplified clock-face rules.
Official guidance and sources
- Highway Code: moving off, junctions, roundabouts and reversing (159–203) (opens in a new tab)
- Highway Code: signals, braking, speed and lanes (103–158) (opens in a new tab)
- Highway Code: road users requiring extra care (204–225) (opens in a new tab)
Guidance checked . Independent ALD lesson notes; not produced or endorsed by DVSA. Follow current official guidance if information changes.
Contains public sector information licensed under the Open Government Licence v3.0. Explanations and diagrams are ALD’s own.
