Changing up
- Build speed smoothly while listening to the engine and watching the road. Change up when the car is ready for the next gear; fixed speed rules do not suit every car or hill.
- Ease off the gas, press the clutch fully down and guide the lever into the next gear without forcing it.
- Raise the clutch smoothly as you apply suitable gas. Keep the other hand controlling the wheel and return your changing hand promptly.
Changing down for a hazard
- Read the junction, bend or queue early. Check mirrors before planned slowing and brake to the speed needed.
- Select a lower gear suitable for that speed, then bring the clutch up smoothly before the next driving task where possible.
- You can skip intermediate gears when appropriate, such as changing directly from fourth to second after slowing. Avoid selecting a gear too low for the remaining speed.
Recognise when the gear is unsuitable
- Juddering, struggling or poor response can mean the gear is too high. Reduce the load or select a suitable lower gear.
- An unnecessarily loud, fast-running engine can mean it is time to change up, if the road and task allow.
- Keep the clutch up when driving normally. Avoid approaching a hazard with it held down unnecessarily.
Common mistakes
Looking at the lever
Learn the gate while stationary. Keep watching the road during the change.
Using gears to repair a fast approach
Brake to a suitable speed first, then select the gear that supports the next action.
Rules and sources
Highway Code rules 117–122 cover braking, control and coasting. Select a suitable lower gear before a long downhill slope (rule 160).
Official guidance and sources
- Highway Code: signals, braking, speed and lanes (103–158) (opens in a new tab)
- Highway Code: moving off, junctions, roundabouts and reversing (159–203) (opens in a new tab)
Guidance checked . Independent ALD lesson notes; not produced or endorsed by DVSA. Follow current official guidance if information changes.
Contains public sector information licensed under the Open Government Licence v3.0. Explanations and diagrams are ALD’s own.
